Saturday, December 18, 2010

Using a Dassenplank Knitting Loom



Measurements below (and a threading guide)..

Made of nice quality hardwood with rounded corners and a simple, plain clear varnish. I forgot to mention that the board's thickness is a little under 3/4". The distance between pegs is measured on-center. The thickness of the pegs is hard to measure with what I have... but they look to be arounnd 3/16" and the ball 3/8".

 Please disregard all my ums and errs. ;)

at

3 comments:

  1. AnonymousJanuary 10, 2011 at 8:38 PM

    Is there no place someone can order the dassenplank like yours? I have been want one so badly! especially after seeing how versatile it is, and I want one in wood like yours not of plastic.

    ReplyDelete
  2. Hungarican ChickJanuary 10, 2011 at 8:41 PM

    Hey there. Well, Pamela's Homespun is nowhere to be found except as a vendor at the Black Sheep Gathering at Eugene. I see no mention of the dassenplank except in past years. It's not a difficult project for anyone slightly talented in woodwork. I will post a drawing and dimensions.

    ReplyDelete
  3. AnonymousJanuary 13, 2011 at 10:30 AM

    THANK YOU FOR THE DIMENSIONS! I MIGHT MAKE MY DH FABRICATE ONE FOR ME!

    ReplyDelete

The Hungarican Chick's blog is an tyrannical autocracy. She will heartlessly send troll-comments into oblivion by quick and sure deletion. So if trollishness is your goal, don't bother.